Corrugated roofing sheet

Corrugated roofing sheet

The corrugated roof steel sheet is a product obtained by subjecting a cold-rolled steel sheet or a galvanized steel sheet to a surface chemical treatment (roll coating) or a composite organic film (such as a PVC film) and then baking and solidifying. Some people refer to this product as “pre-rolled color steel plate” and “plastic color steel plate”. The color plate products are produced by the manufacturer on a continuous production line. The corrugated roof steel sheet has the mechanical strength of the steel material, the easy forming property, and the good decorative and corrosion resistance of the coating material. It is an emerging material that is highly respected in the world today.

The corrugated roof steel sheet has the advantages of light weight, high strength, heat insulation, beautiful appearance and durability, and is a high-speed building installation which is integrated with architecture and decoration. Widely used in large-span factories, warehouses, office buildings, villas, roofs, air purification rooms, cold storage, shops, kiosks and temporary housing. The weight of the corrugated roof steel sheet is less than 14KG, which can reduce the structural load and reduce the structural cost of the movable house.

Corrugated roof sheet steel features

Easy installation

The corrugated thin steel plate has the characteristics of light weight, splicing installation and free cutting, which determines the simplicity of installation of the movable room, which can greatly improve the efficiency and save the construction period. The surface material and insulation material of the fire-proof color steel sandwich panel are non-combustible materials, which can fully meet the fire protection specifications of the movable room.

Long lasting

A variety of studies have shown that it has been widely used in foreign countries for more than 40 years. The shelf life of color-coated steel plates treated with special coatings is 10-15 years, and the anti-corrosion coatings are sprayed every 10 years thereafter. The life of the plates can reach more than 35 years.

Beautiful, pressed-type color steel plate with clear lines up to dozens of colors, can meet the needs of any style of movable room buildings, to achieve satisfactory results.

Heat insulation

The common insulation materials of the corrugated composite board are: rock wool, glass fiber cotton, polystyrene (EPS), polyurethane, etc., and the thermal conductivity is low, so that the movable room has good thermal insulation effect. The high-strength steel sheet is made of high-strength steel sheet (tensile strength 5600kg/cm) plus the most advanced design and roll forming. Therefore, it has excellent structural characteristics.

Corrugated roof sheet steel specification

It is often used in the plug-in type. It has the advantages of convenient installation, time saving, material saving, good flatness and high strength. It is especially suitable for ceiling and partition systems.
Thickness (mm): 50-250;
Length (mm): due to continuous molding production, the length of the board can be determined according to user needs;
Width (mm): 1150 (1200);
Core material performance: √ Polystyrene Bulk density: ≥15kg/m3 √ Thermal conductivity ≤0.036W/m.K √ Maximum use temperature: about 100 ° C.
Rock wool： · Bulk density: ≥110kg/m3 · Thermal conductivity: ≤0.043W/m.K · Maximum use temperature: about 500 ° C
A, non-combustible: B1
B, non-combustible: Class A

Corrugated roof sheet steel performance

(1) The 950-watt enamel color steel sandwich panel integrates the corrugated board and the sandwich panel, which is three times stronger than the ordinary flat color steel sandwich panel. The hidden self-drilling screw is used to connect with the truss without destroying the color coated board. The exposed part prolongs the life of the color steel sandwich panel; the plate and the plate are connected by a snap cap type, which is convenient for construction and improves the efficiency, and the maximum feature is not easy to seep.

(2) Rockwool heat insulation color steel sandwich panel The core material is made of basalt and other natural ore as the main raw material, melted into fiber at high temperature, added with appropriate amount of binder, and solidified and processed. The product is suitable for industrial equipment, construction, ship insulation, sound insulation, etc., and is suitable for purifying rooms, explosion-proof fire-proof workshop ceilings, partitions, etc.

(3) The bond strength of PU polyurethane color steel sandwich panel is not less than 0.09MPa, the combustion performance of sandwich panel reaches B1 grade, and the flexural capacity of sandwich panel is Lo/200 (Lo is the distance between supports). The bending capacity of the sandwich panel is not less than 0.5Kn/m2.

(4) Polyurethane edge-sealing glass wool and rock wool sandwich panels are made of high-quality color coated steel sheets as the surface material, continuous cotton fiber rock wool and glass wool as the core material, and high-density rigid foamed polyurethane for the mouth filling. After high-pressure foam curing, automatic dense cotton cloth and composite molding by super long precision double track control, its fireproof effect is better than pure polyurethane sandwich panel.

This post is also available in: Russian